Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TEG regeneration alternatives

Status
Not open for further replies.

MGlycol

Chemical
Jan 25, 2004
6
0
0
IT
What do you think about TEG regeneration alternatives (i.e. Drizo, Coldfinger, etc.)in terms of advantages and disadvantages vs. the stripping gas common method employed?
 
Replies continue below

Recommended for you

Try contacting KCC Process Equipment, I think they have licenses for all the different TEG process and as such I am sure they could point you in the right direction with pros and cons for each one

I think you will find that each system has its advantageous and disadvantageous and therefore the selection will depend on you detailed process requirments/cost analysis/environmental issues etc

MB
 
Unless you are looking for a 100 Deg F dew point depression, there is no need for patent medicines on TEG units. A simple Stahl Column will get the extra drying needed for a large dew point depression. QB Johnson is a packager in Oklahoma City that ships units world wide.

If you are in an enviromentally sensitive area, don't forget the BTEX.
 
Status
Not open for further replies.
Back
Top