Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

TEG troubleshooting

Thread starter 1Chemical2Process
Start date Sep 5, 2004

Status: Not open for further replies.

Sep 5, 2004

1Chemical2Process

Petroleum

I am working on the revamp of a TEG dehydration system which has been shut in for a while. Lean glycol lab results show a pH of 4.5, chlorides(6mg/l),water content (2%) and hydrocarbon (1000mg/kg). Any suggestions or experiences to restore the glycol to acceptable conditions (i.e. pH,HC content) will be appreciated. Thank you.