Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Telomer Resistance

Status
Not open for further replies.

Matt_Stt

Mechanical
Jan 4, 2017
9
Good afternoon eng-tip users,

I have a quick question about coatings. Currently we have a steel fixture uswed for holding sheet metal as it gets sprayed with telomer and then baked in the furnance. This fixture becomes heavily coated with Telomer and requires quite abrqasaive cleaning, usually sand blasting which erodes the fixture and requires it to be sent out to an external vendor, my question is, is there a coating that could be applied to the fixture that would increase its "telomer resistantance" requiring less frequent cleaning and less abrasive (done on site)

Cheers!
 
Replies continue below

Recommended for you

Do you meal Al foil?
You can also buy light gauge stainless steel foil.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor