Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tensile test damage modelling

Status
Not open for further replies.
Mechanicslearner

Mechanicslearner

Structural
Joined
Jan 15, 2016
Messages
87
Location
MD
Hello,

Is it possible to do tensile test damage modelling by displacement driven load instead of load driven. I have ductile damage and plasticity values and to do the damage I have to apply large load but is it also possible that necking and breaking can occur due to displacement driven in BC? Please help me with this
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
viscoelastic behavior + Damage
Replies
8
Views
12K
snow83
S
vikram manoj
  • Question Question
How to reduce fiber damage
Replies
2
Views
8K
Compositepro
Compositepro
W
  • Locked
  • Question Question
How to model print orientation effects in a 3D-printed tensile test without the AM plugin?
Replies
4
Views
2K
wahira
W
jball1
  • Locked
  • Question Question
Connector Damage/Failure
Replies
6
Views
1K
jball1
jball1
DavidMcArthur
  • Locked
  • Question Question
ABAQUS Explicit Damage
Replies
2
Views
958
DavidMcArthur
DavidMcArthur

Part and Inventory Search

Sponsor

Back
Top