Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Testing of safety relay

Status
Not open for further replies.

Student2024

Industrial
Nov 12, 2024
1
.
 
Last edited:
Replies continue below

Recommended for you

Do i need to open the ct terminal bridges?
You should not be asked to do this without direct supervision.
Our instructor warned us about the "Big Orange Basket Ball", which was often the last thing that a person saw when opening CT circuits with current flowing.
The following blindness was often temporary, but best avoided.
Look up the instructions of the test set.
Be patient.
Don't try do do anything before your instructor/mentor gives you direct instructions.
A very old electrician/engineer told me when I was a young hot-shot;
The Old Guy said:
Son. I never wanted to be the smartest electrician. I always wanted to be the oldest electrician!"
 
As I heard it when I first went to work as an electrician at a steel mill:

"There are old electricians, and there are bold electricians. But there are no old bold electricians..."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor