Sep 13, 2019 #1 Nnadi Electrical Sep 13, 2019 2 please I need insight on the use of tethered pig tool in pipeline in-line inspection
Sep 13, 2019 #2 itsmoked Electrical Feb 18, 2005 19,114 What do YOU consider "insight"? Keith Cress kcress - http://www.flaminsystems.com Upvote 0 Downvote
Sep 13, 2019 Thread starter #3 Nnadi Electrical Sep 13, 2019 2 working principle, length it can go, and how the data can be interpreted Upvote 0 Downvote
Sep 13, 2019 #4 LittleInch Petroleum Mar 27, 2013 22,538 Ask a vendor / inspection company but be prepared with a LOT more information. Typically tethered pigs can go between 400 to 4000m depending on inner surface, number and angle of bends plus diameter of bend. Either UT or MFL. Interpretation is done by inspection company. Remember - More details = better answers Also: If you get a response it's polite to respond to it. Upvote 0 Downvote
Ask a vendor / inspection company but be prepared with a LOT more information. Typically tethered pigs can go between 400 to 4000m depending on inner surface, number and angle of bends plus diameter of bend. Either UT or MFL. Interpretation is done by inspection company. Remember - More details = better answers Also: If you get a response it's polite to respond to it.
