Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

the aod 1

Status
Not open for further replies.

79capri

Automotive
Feb 5, 2007
1
i am building a 79 capri and i am putting a pretty healthy 351w in it i want the overdrive because i am running 4:10 gears....i am looking for any free mods that i can do to help it with the way that it shifts sloppy......is there anything that can be done to the valve body or the seperator plate to help this problem
 
Replies continue below

Recommended for you

Do a websearch on "AOD Upgrades", you'll turn up several outfits that make an upgraded shift body and/or parts. The '90-up OD servos were stronger than earlier ones used with "normal" V8's, even stronger than the Police/Taxi servos in pre-'90.

If yours has throttle linkage (not cable) be advised that setting the linkage correctly is ultra-important, to the point that a misadjusted linkage can burn up the trans in 100 miles!
 
I think his qualifier that rules out kits is the word free

Regards

eng-tips, by professional engineers for professional engineers
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 

If you modify the transmission and mess it up, or, skip the modification and fry it, things will no longer be free. A shift kit and decent trans cooler are among the best longevity investments one can make. Neither one has to be expensive.

 
Fabrico

I completely agree with both your posts.

Regards

eng-tips, by professional engineers for professional engineers
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor