collner
Mechanical
- Aug 23, 2012
- 5
I'm looking for how to connect a LP-20 (reversed) waterproof connector to the wires in its cable.
I'm supposed to attach four of the wires in a five wired cable. The five wired cable have a CEE 400 V / 16 Amp connector, and in the other and I need to attach the LP-20.
The LP-20 have its four pins marked 1,2,3 and 4.
Anyone seen wiring scheme for these?
I will connect to commercial products (Antminer S21 Hydro), and therefore I can't choose my own pattern for this, and I guess I easily fry things if I do this wrong.
The producer do not reply my emails, neither is there a scheme or even a product picture on their site;
One distributor list these, but without the wiring data;
I'm supposed to attach four of the wires in a five wired cable. The five wired cable have a CEE 400 V / 16 Amp connector, and in the other and I need to attach the LP-20.
The LP-20 have its four pins marked 1,2,3 and 4.
Anyone seen wiring scheme for these?
I will connect to commercial products (Antminer S21 Hydro), and therefore I can't choose my own pattern for this, and I guess I easily fry things if I do this wrong.
The producer do not reply my emails, neither is there a scheme or even a product picture on their site;
One distributor list these, but without the wiring data;
