Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

thermal analysis in ANSYS

Status
Not open for further replies.
yu2106

yu2106

Mechanical
Nov 11, 2009
1
I need to find out the outer temperature of my model. The model basically consist of 2 tubes. The region between the outer and inner tube is filled with oil. The inner tube inner diameter has a temperature of 266F.

Can somebody guide me to get the analysis.
 
Status
Not open for further replies.

Similar threads

H
  • Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
1K
hmsilva
H
somebodyfromworld
  • Question
ACT extensions for Ansys
Replies
0
Views
651
somebodyfromworld
somebodyfromworld
struclearner
  • Locked
  • Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
556
struclearner
struclearner
Faraz1997
  • Locked
  • Question
How to reduce number of iterations in tabular data of transient thermal analysis
Replies
3
Views
477
NRP99
NRP99
H
  • Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
2K
karachun
karachun

Part and Inventory Search

Sponsor

Back
Top Bottom