Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thermo conductivity POM 1

Status
Not open for further replies.

Golfnbill

Mechanical
Feb 16, 2007
1
US
i am looking for the thermo conductivity of a specific grade of POM. It is Delrin II 150E NC010. I also would like to know the specific heat for this same material. I need these two pieces of information to do a mold cool analysis.

Thanks
 
Replies continue below

Recommended for you

Firstly any competent supplier should give you that data. In your case DuPont I guess as that's their tradename.

According to that grade is a standard unfilled acetal or POM (two names for the same thing) homopolymer.


So just look up the data for any standard POM homopolymer for example a Google search for "delrin thermal conductivity" gives useful hits.




There is not any memory with less satisfaction than the memory of some temptation we resisted.
- James Branch Cabell
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top