Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

thermo physical and mechanical properties of SA387Gr11

Status
Not open for further replies.

Mert-41

Mechanical
Sep 22, 2019
8
Dear All Experts;

I am trying to make a welding analysis for SA 387 GR 11 material.
and to complete this analysis I need the thermo physical and mechanical values of material SA 387 GR 11. where can I find out these values.

I would appreciate it if someone could give some suggestions

Best regards.
 
Replies continue below

Recommended for you

Refer ASME (Boiler and pressure vessel code) BPVC Section II-Materials, Part D-Properties or API/ASME 579: Fitness for service. You will find thermal, mechanical properties with temperature derating (till~500-600deg C).

But welding analysis would require properties till melting temperature/phase transformation change input which you may need to look in research papers or theses.
 
Dear NRP99

thank you for your reply and suggestion.

I read a lot of paper and articles about welding and residual stresses but I have not seen any paper related SA 387 GR 11 C2.

thermal and mechanical properties in BPVC Section II Part D Properties till 800 C.

thank you again for your reply.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor