miller9
Industrial
- Sep 19, 2007
- 4
Thermoprobes vs boiler start up curves
"pressure/temperture".
Are thermoprobes really required?
Startup Temperature: Monitor flue gas temperature ramp from o to 100C then 100 to 499c for boiler startup preventing overfiring that could damage superheat tubes, or underfiring that could potentially send wet steam to the steam turbine damaging buckets.
"pressure/temperture".
Are thermoprobes really required?
Startup Temperature: Monitor flue gas temperature ramp from o to 100C then 100 to 499c for boiler startup preventing overfiring that could damage superheat tubes, or underfiring that could potentially send wet steam to the steam turbine damaging buckets.
