My company has critical emergency diesel generators stationed throughout its infrastructure. We are looking for some expertise in modifying or replacing a temperature switch located on these engines that is exposed directly to the cooling system water. This switch sends a signal to the engine controls to shut down the engine in the event of high cooling water temperature. We would like to modify the switch to add a thermowell to allow for ease of removal for calibration and system functional testing. Does anyone have experience in this type of modification/design?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Thermowell installation for maintenance
- Thread starter MaintGuy
- Start date
Check with "OMEGA Egineering" or "Watlow", they may have a standard Fix. Check Omega.com website for possible application solutions they may have posted. Some application examples are shown in their temperature sales catalog.
Goog luck in your serch.
Goog luck in your serch.
- Status
Similar threads
- Locked
- Question
- Locked
- Question