Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thin abrasive cut off wheels

Status
Not open for further replies.

samvanwesen

Mechanical
Nov 25, 2016
11
Hi all,

we have some ACM cut off machines running in our shop ( The company stopped a while ago and we had a steady supply for cutoff wheels (resinoid type abrasive). The cut off wheels measured: 4'' with a hole of 0.5'' and a thickness of 0.002''.
I remember there were suppliers in Idaho, USA who could offer these. In europe the prices are ridiculous.

Any experiences with thin resinoid cut off wheels and where to get them?

Thanks!

Sam
 
Replies continue below

Recommended for you

very doubtful about the thickness being .002"
 
We use Avery wheels. they are a great supplier.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor