Sep 14, 2006 #1 TMoore45 Mechanical Sep 14, 2006 2 I need to find a chart/table showing tolerances for Go/No Go Thread Plug Gages. Any suggestions?
Sep 15, 2006 #2 unclesyd Materials Aug 21, 2002 9,819 Checkout the Hemco website. Gage tolerances get a little complicated depending on what you are trying to accomplish. I would suggest that you contact your specific gage maker with any specific question. http://www.hemcogages.com/page18.pdf Upvote 0 Downvote
Checkout the Hemco website. Gage tolerances get a little complicated depending on what you are trying to accomplish. I would suggest that you contact your specific gage maker with any specific question. http://www.hemcogages.com/page18.pdf
Sep 15, 2006 Thread starter #3 TMoore45 Mechanical Sep 14, 2006 2 How does Class 2A/2B or 3A/3B relate to X and Y tolerances? Upvote 0 Downvote
Sep 15, 2006 #4 deanc Specifier/Regulator Sep 18, 2002 855 http://primepa.org/curriculum/pdf/Metrology_Module3.pdf Start on page 47. More then you ever wanted to know. These folks have a whole series of pdfs. Upvote 0 Downvote
http://primepa.org/curriculum/pdf/Metrology_Module3.pdf Start on page 47. More then you ever wanted to know. These folks have a whole series of pdfs.
Sep 15, 2006 #5 deanc Specifier/Regulator Sep 18, 2002 855 http://www.cutting-tool-supply.com/TechTips/Index.htm More good stuff. Upvote 0 Downvote
