May 27, 2008 #1 bobbysteels Structural May 27, 2008 1 i am looking at a piping drawing and it is asking for Thread o let 6000LB,SCF,CS,A105. DOES ANY ONE KNOW WHAT IS SCF?
i am looking at a piping drawing and it is asking for Thread o let 6000LB,SCF,CS,A105. DOES ANY ONE KNOW WHAT IS SCF?
May 28, 2008 #2 metengr Materials Oct 2, 2003 15,478 I reviewed ASME B16.11, and since this was on a drawing instead of markings on an actual fitting, I would tend to believe SCF is being called out for Special Class Fitting. Upvote 0 Downvote
I reviewed ASME B16.11, and since this was on a drawing instead of markings on an actual fitting, I would tend to believe SCF is being called out for Special Class Fitting.
May 28, 2008 #3 unclesyd Materials Aug 21, 2002 9,819 Here is a descriptor for SCF from Kitz concerning SS fittings. Could someone have just changed the material? There are special cleanliness requirements for CS pipe and fittings for certain processes, like Phosgene gas. http://www.kitz-sct.com/fittings.html Upvote 0 Downvote
Here is a descriptor for SCF from Kitz concerning SS fittings. Could someone have just changed the material? There are special cleanliness requirements for CS pipe and fittings for certain processes, like Phosgene gas. http://www.kitz-sct.com/fittings.html
