Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thread size on a REED-PRENTICE Lathe

Status
Not open for further replies.
foxtiger

foxtiger

Mechanical
Feb 12, 2003
1
I need to know the specifications of the spindle thread on a 20" Standard Reed-Prentice Engine Lathe. It roughly measures 7 13/16" Dia with maybe 5 threads/inch. Maybe you can point me in the right direction
 
Status
Not open for further replies.

Similar threads

T
  • Question
Why use a buildbotics controller
Replies
0
Views
38
thomas29
T
dogbural
  • Question
machining a long tube (380mm)
Replies
8
Views
3K
Gr8blu
Gr8blu
MF Afif
  • Locked
  • Question
Element deletion on the broken chips during machining
Replies
1
Views
608
Stick.
Stick.
S
  • Question
Turning a 410 S.S 15mm round bar to 12.7mm
Replies
6
Views
3K
Saman2002
S
LKENNEDY
  • Locked
  • Question
Supplier wants manufacturing process notes on drawing
Replies
7
Views
679
HR ShoveNstuff
HR ShoveNstuff

Part and Inventory Search

Sponsor

Back
Top Bottom