thread238-458354 Hi referring to t

[Jijaz]

thread238-458354
Hi referring to this thread, I have the loads for short circuit and other wind loads. But I am not sure how to apply those on the structure. I modeled the structure on robot structures. But these loads i am not sure how to use. I am attaching a screenshot if anyone civil/structural engineer who can let me know how to use them.

 

[itsmoked]

Jijaz; I've got no idea what to do with those numbers. I don't know of any EEs who would. I suggest you check these civil forums. Find an active one.

Civil Forums

Keith Cress
kcress -

http://www.flaminsystems.com

 

[bacon4life]

A far number of EE's do distribution and sub-transmission line designs, and there are a couple of regular folks on forum who are familiar with line design work. However, correctly applying loads to a structure is well beyond just getting bit of free advice over the internet. Unless you can reframe the question to be much more specific, I would recommend hiring an engineering firm that does line design work.