thailuuvan
Mechanical
- Aug 23, 2016
- 11
thread560-400918
Catia v5 capture can take pictures match your requests :
Support most CATIA 3D file <Part, Product, Cgr, 3Dxml, Step, Igs>.
Define pictures follow direction of view < front view, back view,top view, bottom view, left view, right view, iso view>.
Customize back ground color with two color : white and default.
Customize format picture : jpg, bmp, tif, emf. — Customize size of picture with your input.
Picture file name is same with 3D file name and subfix is view name < "-Front", "-Back", "-Top", "-Bottom", "-Left", "-Right", "-Iso">.
Try it at
JIG DESIGN
CATIA Automation Tool
Catia v5 capture can take pictures match your requests :
Support most CATIA 3D file <Part, Product, Cgr, 3Dxml, Step, Igs>.
Define pictures follow direction of view < front view, back view,top view, bottom view, left view, right view, iso view>.
Customize back ground color with two color : white and default.
Customize format picture : jpg, bmp, tif, emf. — Customize size of picture with your input.
Picture file name is same with 3D file name and subfix is view name < "-Front", "-Back", "-Top", "-Bottom", "-Left", "-Right", "-Iso">.
Try it at
JIG DESIGN
CATIA Automation Tool