Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

thread577-406713 Hi Guys I'm runn

Status
Not open for further replies.

redhedrobby

Computer
Oct 19, 2020
1
thread577-406713
Hi Guys
I'm running a single seat of NXI-Deas 5 in XP SP3. After selecting the model file, I get the following error:

Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\UGS\NXI5\geo\geomod.exe
This application has requested the Runtime to terminate it in an unusual way.

It is only on one particular model file.
I'm not sure how it happened but I started up in drafting then opened up a model file. This is not usually allowable. but it did.
So I carried on working and saved both model & drafting as I exited.
No I do not have a backup file I can rename to open.

Now I have a problem!
Any ideas on a solution would be very gratefully accepted.
Thanks
 
Replies continue below

Recommended for you

When you open the model file, go to where the stop button and start clicking that area before the error pops up. We have not run I-Deas in a long long time but this seemed to work in certain situations.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor