Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tilt saddle information required

Status
Not open for further replies.

Knowledgeseeker101

Mechanical
Nov 16, 2018
10
hi fellow engineers, I was wondering if anyone came across a standardized table that shows you how much can tilt support saddle handle based on the materials used. Reason being, I am creating a calculator on excel that when i enter dimensions of the heavy hauled load in. It would suggest the size that is needed and from what material it should be made out off. ex: Timber saddle, Oak and steel etc...
 
 https://files.engineering.com/getfile.aspx?folder=214ea56c-d4bc-487e-9750-1cee8c82a340&file=question-min.jpg
Replies continue below

Recommended for you

This is a pretty dead forum. You may want to post in one of the forums under Structural Engineers for your specific question.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor