Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

toolbox cam generator

Status
Not open for further replies.

swforge1

Mechanical
Jun 23, 2010
39
Hi All
Anyone have any tools able to extract input data from the cam creator for export to a table later? Once cams are created all information, path type, timing, etc. is lost forever. i would like to be able to export this info as a check on the drawing. Manufaturers who work directly from models might(and have) made parts of unexpected path types
 
Replies continue below

Recommended for you

Maybe Camnetics can help... I used this product years ago for making True Involute Gears, but that was just a portion of their software. Cams are their specialty.


Scott Baugh, CSWP [pc2]
Berry Plastics
Cad Admin\Design Engineer
GEASWUG Greater Evansville Area SWUG Leader
"If it's not broke, Don't fix it!"
faq731-376
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor