Mar 3, 2009 #1 IDCQC Industrial Mar 3, 2009 3 0 0 US I NEED THE RECOMMENDED TORQUE VALUES FOR 150# AND 300# RFWN FLANGES. I AM USING A320 GR.L7 STUDS, A194 GR. 4 OR 7 NUTS WITH A SPIRAL WOUND METALIC GASKET W/ FLEXIBLE-GRAPHITE FILLER.
I NEED THE RECOMMENDED TORQUE VALUES FOR 150# AND 300# RFWN FLANGES. I AM USING A320 GR.L7 STUDS, A194 GR. 4 OR 7 NUTS WITH A SPIRAL WOUND METALIC GASKET W/ FLEXIBLE-GRAPHITE FILLER.
Mar 3, 2009 #2 JLSeagull Electrical Feb 19, 2006 2,070 0 0 US Consider checking in the Piping & fluid mechanics topic under Mechanical Engineers; or perhaps under ASME. BTW, avoid using all capital letters. Many forum users regard it as "shouting" thus consider caps as "bad form". Upvote 0 Downvote
Consider checking in the Piping & fluid mechanics topic under Mechanical Engineers; or perhaps under ASME. BTW, avoid using all capital letters. Many forum users regard it as "shouting" thus consider caps as "bad form".
Mar 4, 2009 #3 SnTMan Mechanical Jan 22, 2005 6,780 0 36 US IDCQC, have you tried a site search via Google above? This topic has been discussed at length. Regards, Mike Upvote 0 Downvote
IDCQC, have you tried a site search via Google above? This topic has been discussed at length. Regards, Mike
