TRA Yearbook

[NeztikA]

Hi,

Could someone provide me a copy of the TRA yearbook (PDF)? Somewhere between 2005 and 2010 would be ok.

I am developing CAD software dedicated to wheel/rim design.
I already have a copy of the ETRTO 2003 and 2010, and would like some comparisation material.

Thanks in advance!


Alex
alexkitzen@gmail.com

 

[GregLocock]

I suggest you write to T&RA and offer to buy one

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?

 

[NeztikA]

Hi Greg,

I would only need the pages about rims.
To buy the book would make no sense. That’s why I asked ll for pdf.
Thanks anyway!

Alex

 

[CapriRacer]

If you have a copy of ETRTO, then you have what's in the TRA book. They should be identical (except for some specialty stuff).

Besides, it isn't like this stuff isn't copyrighted or anything - meaning you will NOT find a free Pdf, it is copyrighted. - AND - there are pages and pages of the stuff. If you can't afford the $150 for the yearbook, you probably shouldn't be doing what you are doing.

In another thread you mentioned balance weights - and I responded there.

I'm going to suggest you work with a wheel manufacturer as they are way, way more knowledgeable about what would be needed in a CAD than I am. My background is in the engineering of tires - what do they do and how do they do it. I know a bit about wheels, but am hardly an expert.