Transfer from I-DEAS 11 to 10

[toothroot]

Hi all,

is there any way to transfer model files (part geometries and FE meshes) from I-DEAS 11 to I-DEAS 10?

Any help would be appreciated,
Daniel

 

[feadude]

If you make an archive file you might be able to do it. Usually it goes the other way around from 10 to 11 not 11 to 10

 

[PawelMaselko]

Spróbuj tak:
[in 11NX] File->Export->VDA lub .unv
[in 10NX] File->Imoprt->VDA lub .unv

U mnie to dzia?a bez problemu

pzdr
Pawel M