Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Transfer temperature from a smaller thermal model to a larger structural model in workbench

Status
Not open for further replies.

GeorgeEllwood

Mechanical
Aug 22, 2006
134
GB
Hello,
I'm wondering if anyone can help. I'd like to carry out a thermal model and then transfer the temperature result to a structural model in workbench. Normally when I do this I use the same geometry for both the thermal and structural model and transfer the temperatures in the normal way using workbench.
What I'd like to do is to create a smaller model for the thermal model and then transfer the results across to a larger structural model. As shown in the schematic. I seem to remember seeing an example of how to do this before but I can't find it now. Can someone let me know if this is possible and how to do it?
Thanks
George
 
 http://files.engineering.com/getfile.aspx?folder=e2ed0e75-b71f-4df0-b949-da2bad7eaa37&file=Untitled.jpg
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top