Transferring geometry

[Jashe]

My CMM guy needs an iges file with a certain axis and a couple circles I created for him. But when I created the iges neither of those entities are there. The points that I used to create the axis are within a geometrical set but thats it.
Also, he's using a program called CMM Manager and it's not reading the points I've created. So is there a way to create this iges so he can get an axis and geometry?

 

[JeniaL]

instead of axis create a line..i don't have any problems with lines and points.

 

[jackk]

Try reading your IGES file back into CATIA to verify what geometry you're sending.

 

[Jashe]

Okay, thanks. But what about this CMM Manager program? It's not reading any of these geometrical entities. It shows everything is in one layer. Has anybody worked with this program?

 

[Jashe]

It did read the lines and points on the iges jackk. I can live with that if only his program would read it.

 

[JeniaL]

https://www.cmmmanager.com/forum/viewtopic.php?f=6&t=810

take a look at that txt file. i'm not a user of cmm manager. just did a quick search on google.

 

[Jashe]

Thank you very much. I'll send the link to the CMM guy.