Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

TRANSFORMER POWER SUPPLY OUTPUT FREQUENCY HIGH AND ERRATIC

Status
Not open for further replies.

zoo123

Mechanical
Aug 29, 2004
18

FOR A sTATIC IONISERR WITH ac ionisation, the TRANSFORMER WITH HIGH VOLTAGE LOW AMP. WAS MADE. bUT THE Supplier transformer fluctuates and shows up frequencies of 00 to 400 hz. Not sure what might be the issue. The voltages and ampere levels are decent. But, the sinusoidal freuency is not good. We filtered the input 20 v, 50 hz freq. and then the input was the primary supply to transformer. pl. help what could be the root cause.
 
Replies continue below

Recommended for you

AS OF NOW, HE IS CLUELESS. HENCE our request to experts like all of you. Thanks.
 
we do not have a schematic yet. but the transformer gets its primary through an LED INDICATOR AND PRIOR TO WHICH THE FUSE IS KEPT.
We have a filter for removing the noise first.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor