Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Transforming displacements into cylindrical csys in Femap

Status
Not open for further replies.
krt222

krt222

Mechanical
Joined
Dec 8, 2009
Messages
10
Location
US
Hello,

I am using Femap v10 with NeiNastran and have a model with solid tet10 elements with displacement results. I am interested in transforming the displacements into a local cylindrical csys to obtain displacements in the T2 (theta) direction of that csys. Will the resulting displacements after said transformation be in the model units of length or will they be angular? If they are angular, will they be in radians or degrees?

Thanks.
 
Status
Not open for further replies.

Similar threads

D
  • Locked
Meshing in Femap
Replies
3
Views
2K
rb1957
rb1957
admiral007
  • Locked
  • Question Question
FEMAP CSV Input
Replies
4
Views
7K
admiral007
admiral007
dcascap
  • Locked
  • Question Question
Femap to openradioss
Replies
4
Views
2K
dcascap
dcascap
DJL Eng
  • Locked
  • Question Question
Stiffness Matrix/ Solving for Displacements Problem
Replies
17
Views
2K
rb1957
rb1957
Gardenfence
  • Locked
  • Question Question
Equivalent beam model of a thin cylindrical shell
Replies
8
Views
4K
GVDR
G

Part and Inventory Search

Sponsor

Back
Top