transmission line impedance

[powerjunx]

hello, guys!

I'm looking for the some data on WESTINGHOUSE ELECTRICAL TRANSMISSION AND DISTRIBUTION REFERENCE HANDBOOK PP. 83, where it points out conductor resistance and sheath reactance of the conductor, etc for FAULT CALCULATION purposes.
I'm hoping some tables for its designated values for this parameters..
i am thankful to anyone who can reply to me soon.

 

[wbd]

I'm not sure what you are asking for. On my page 83, ABB reprint of W T&D book (the W one is home), the table has reactance, resistance and shunt capacitive reactance values listed. You just need to set up the equations depending on short, medium or long transmission line. Is that what you are asking for?

 

[cuky2000]

Enclose is the page 83 requested.

http://cuky2000.250free.com/Cable_1C_Paper_Insulated_Table_10_pp83.pdf

_{SUGGESTION: Verify with cable manufacturer(s) if there is significant variation with modern cable design.}

 

[wbd]

Ok, now that I re-read the posting 3 times, I see where he is asking for that page. I guess I got confused since a specific page was referenced, I assumed that he had that page.