Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Transverse crack developed on induction bend

nitin badhane

nitin badhane

Mechanical
Sep 23, 2019
2
Greeting to all!
I observed Transverse crack developed on induction bend of 12 inch line carrying powder product. Line is SS material with 4.5mm thickness connecting to SILO. It doesn't look stress analysis issue as connected to equipment via fabric bellow. What could be the reason of crack?
 
Why a forged elbow was not used?
Send the failed location to a lab for detailed failure analysis.
 
You must log in or register to reply here.

Similar threads

jafary64
  • Locked
  • Question
Help for Calculate C on Miter Bend Formula
Replies
12
Views
420
GBTorpenhow
GBTorpenhow
Hayms
  • Locked
  • Question
Induction Bend Thinning Allowance ASME B31.4/B31.8/B16.9
Replies
3
Views
242
SJones
SJones
Mathew95
Formular for calculating the elastic Bend Radius of an Offshore/subsea Pipeline
Replies
8
Views
2K
LittleInch
LittleInch
Selobay
  • Locked
  • Question
How header pipe surface crack, after 5 years later on the Weldolet Weld Finish Area
Replies
13
Views
410
r6155
r6155
SS_What
  • Locked
  • Question
Pipe Expansion Z-Bend Formula 1
Replies
15
Views
541
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top Bottom