Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

trim mat installation

Status
Not open for further replies.

brnt

Civil/Environmental
Joined
May 7, 2010
Messages
22
Location
CA
I am required to install trim mat on a steep slope to protect it from erosion and allow plant growth. The specs describe installing the mat paralell to the slope. My contractor--who is very experienced--says it makes more sense to install it perpendicular to the slope, like shingles on a roof. I talked to another of my regular contractors who is also very experienced, and he agrees with the first contractor--perpendicular to the slope from the bottom up like shingles. Does anyone have an opinion on this?
 
In areas of broad sheet flow, the mats may be placed vertically or horizontally. In areas of concentrated flow, the mats should be placed vertically.


The orientation of the mats will depend on the specifics of your layout. You may be areas with broad sheet flow and areas with concentrated flow.
 
install generally paralell with flow and overlapping the downstream fabric similar to shingles.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top