Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trip Valves

Status
Not open for further replies.

slimym

Chemical
May 5, 2003
5
0
0
US
I have a Mecman trip valve that requires a minimum of 1 bar of instrument air in order to operate. Normal pressure is about 7 bar. Any ideas on a safe value for the low pressure trip setpoint? Are there any guidelines for this?

thanks
 
Status
Not open for further replies.
Back
Top