Trouble with FACET reference set

[NXMold]

I have not used FACET/Lightweight reference sets, but would like to. My customer defaults, assy, site std, is setup with the FACET lightweight reference set. New components are added automaticly.

I have a large component in my assembly, when I set the FACET reference set, only the sheets in the component are visible. I don't get a facet body for the main solid. The component is part of the moldwizard library and goes back quite a few versions I think, the sheets I see are newer geometry that I added.

I've searched the help files, but they suggest this should be an automatic process.

NX 5.0.3.2 MoldWizard

 

[hudson888]

If you have an advanced assemblies licence you can edit the representations to control which bodies are added or excluded. It requires that you do so on a part by part basis so that just changing your customer defaults will influence future behaviour but pre-existing components may need to be re-saved at the very least to update the reference sets' contents.

Cheers

Hudson

 

[NXMold]

What can I do if I dont have an advanced assembly license? When I edit the facet reference set it seems to just add the regular solid body.

NX 5.0.3.2 MoldWizard