Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Truck Bulkhead design

Status
Not open for further replies.

Rich2001

Mechanical
Mar 23, 2001
896
What is the design standard for Truck bulkheads in the US?
 
Replies continue below

Recommended for you

What are you talking about?

Best regards,

Matthew Ian Loew


Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Bulkhead/Cab Protector

The Motor Vehicle Act Regultaion in Canada requires that a bulkhead/cab protector must be installed thatt can withstand a static load of 50% of the payload, in the horizontal direction. I am looking for the US standard.

I am investigating a serious safety accident, where to bulkhead collapsed.
 
Rich,

Please see the FAQ FMVSS Specifications (faq108-817).


Best regards,

Matthew Ian Loew


Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor