Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

True Band and Steady Band Difference

Thread starter R10G01
Start date Nov 26, 2010

Status: Not open for further replies.

Nov 26, 2010

R10G01

Mechanical

Witnessed the cleaning up of a bore in a cylinder that had distorted from welding. First of all had to true up the diameter by machining a true band then once trued up machined a steady band. Whats the difference between them as thought both would need to be a true diameter?

Sorry if this does not make sense....