Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Turboexpander Thrust Balancer

Status
Not open for further replies.

Bilal2k6

Mechanical
Sep 10, 2019
3
I m working on rotoflow turboexpander this morning its front end bearing pressure exceeds upto 300Psi normaly it's on 275.
Back End Pressure remains on the 225psi as it always.
My understanding is this these both pressures are directly proportional to maintain the balance.and if only the one pressure is exceeding it means there is some problem either in PCV or the jack operating the PVC
Can anyone help me in this.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor