Feb 8, 2008 #1 wpigrad Civil/Environmental Feb 8, 2008 1 Designing parking lot for boat storage. Need turning radii, recommended stall and drive aisle dimensions. Thanks
Designing parking lot for boat storage. Need turning radii, recommended stall and drive aisle dimensions. Thanks
Feb 8, 2008 #2 CarlB Civil/Environmental Jul 11, 2001 1,178 Some info at: http://www.dgif.virginia.gov/boating/building-boat-ramps.asp http://www.usace.army.mil/publications/eng-manuals/em1110-2-410/c-4.pdf Upvote 0 Downvote
Some info at: http://www.dgif.virginia.gov/boating/building-boat-ramps.asp http://www.usace.army.mil/publications/eng-manuals/em1110-2-410/c-4.pdf
Feb 20, 2008 #3 TrafficDesigner Civil/Environmental Jun 6, 2005 63 With AutoTURN you can simulate this in your design file using an RV pulling a boat or a single unit (passenger vehicle) pulling a boat. I wouldn't design the center of the travel lane for anything less than a 50 radius. With large vehicles and trailers of any kind the more room you can give them the better. Upvote 0 Downvote
With AutoTURN you can simulate this in your design file using an RV pulling a boat or a single unit (passenger vehicle) pulling a boat. I wouldn't design the center of the travel lane for anything less than a 50 radius. With large vehicles and trailers of any kind the more room you can give them the better.
