Two monitors problem

[blckwtr]

I have just installed a second monitor in my office, and moved mathcad over to the second monitor. This is practical for many reasons. I can study a cad-file or a document simultaneously as performing calculations.

However, the toolbars is still "stuck" in the other screen, such that when mathcad is active, they are blocking for a document on the first screen...

 

[zdas04]

That's true, was there a question?

David

 

[blckwtr]

Actually no... But here is one;

How do I move the toolbars to where they belong?

 

[zdas04]

If you just can't change your process to run MathCAD on monitor 1 then I've found it best to just close the toolbars. Sometimes that is a pain, but usually it isn't a big deal.

David

 

[blckwtr]

It's probably for the best. I've becom enough experienced to know the most common "hot-keys" after all...

....thx....

 

[PNachtwey]

I have noticed the same problem. I don't have a fix. I have a second monitor that I have rotated 90% so I can see more lines of code or text. The floating too bars stay on the main monitor. It is only a minor anoyance.

 

[IRstuff]

You should report it as a bug, if nothing else.

TTFN

FAQ731-376

 

[NS4U]

If you make your second monitor the "primary" monitor then the toolbars will go on that monitor.... but that's the only "fix" I've found