Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

two phase direct integration method calculations 1

Status
Not open for further replies.

3vessel

Chemical
Mar 24, 2009
1
I am doing two phase direct integration method calculations. can you share something which can help me.
 
Replies continue below

Recommended for you

Hi,
Consider this excel sheet to support your work.
Note: I don't remember who created this document.
I encourage you to develop your own.
BTW consider reading in this forum the queries related to the subject.
Good luck
Pierre
 
 https://files.engineering.com/getfile.aspx?folder=00934f3d-f383-43c3-b27b-f07f30ca960c&file=PSV_Sizing_for_Two_Phase_Flow_Using_Direct_Integration_Method.xlsx
Refer to API-STD-520 Part I (2020) - Appendix C


*** Per ISO-4126, the generic term
'Safety Valve' is used regardless of application or design ***

*** 'Pressure-relief Valve' is the equivalent ASME/API term ***
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor