Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations Toost on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Typical retail space power consumption

Status
Not open for further replies.

Golestan

Mechanical
Nov 27, 2006
110
Hi,
I am collection information on size of service AMPs, (208/3ph) that a typical retail lease space is supplied with. These will be not necessarily high consumers like restaurants etc...
Just retail shopps in strip shopping centers in midwest.
Any information is appreciated.
thanks
 
Replies continue below

Recommended for you

I strongly recommend checking the lease, or typical leases in the market area.
 
Check the Means Estimating manuals published by McGraw-Hill.
They have allready done that for you.
 
This is typically done on a square foot basis. The IEEE Grey Book has typically values, but the data is getting pretty old.

This will vary significantly depending on climate, building codes and occupancy.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor