Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UEL with different number of DOFs at each node

Status
Not open for further replies.
Piyush Gupta

Piyush Gupta

Civil/Environmental
Jan 25, 2017
1
Hi,

Is it possible to define a UEL in Abaqus in such a way that it has different number of DOFs for each node? For example, in a quad, 2 nodes have 2 dofs and the other 2 have 4 dofs for a total of 12 dofs for that element? Thanks.

 
Status
Not open for further replies.

Similar threads

D
  • Question
How to model a 2-node beam element
Replies
1
Views
1K
FEA way
FEA way
chinsan
  • Locked
  • Question
Nodal coordinates and the strains at the nodes
Replies
5
Views
371
chinsan
chinsan
K
  • Question
How to Directly Output Strain Values for Specific Node/Element Sets Without Writing an ODB File in Abaqus? 1
Replies
3
Views
1K
FEA way
FEA way
ruzfactor
  • Locked
  • Question
Convergence issue for a model with driver nodes
Replies
3
Views
279
FEA way
FEA way
abc123ali
  • Question
Different results in cohesive zone modeling for the same data input
Replies
8
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom