UG NX - closed when running an static linear anlysis

[ninjaz]

Hello

When i tried to solve a simple linear static analysis in UG NX with integrated Nastran solver, I recieved an window"UG -closed abrubtly" .

How can i solve this problem.

 

[ninjaz]

i wish to give some additional details. UG worked normal when i created .fem file and .sim file. It went wrong once i give solve command

 

[BlasMolero]

Hello!,
Take a look to the *.LOG file and *.F06 output nastran files located in the directoy of you study, there you will see the reason.

Surely you don't have defined the route to the solver NX NASTRAN, you need to define a minimum of data to allow NX AdvSim lo locate the FEA solver: Click on the study and Edit the SOLVER PARAMETERS, and there enter the solver parameters, or set to use instead the values of variables defined in the system:

UGII_NX_NASTRAN
UGII_NX_NASTRAN_VERSION

Go to FILE > UTILITIES > CUSTOMER DEFAULT > SIMULATION > NX NASTRAN > SOLVER PARAMNETERS and define there all you need to make the solver run, the changes you make here will be available for the new studies.

Best regards,
Blas.



~~~~~~~~~~~~~~~~~~~~~~
Blas Molero Hidalgo
Ingeniero Industrial
Director

IBERISA
48011 BILBAO (SPAIN)
WEB:

http://www.iberisa.com

Blog de FEMAP & NX Nastran:

http://iberisa.wordpress.com/

 

[Walterke]

Is this the first simulation you are trying to run?
Did you acquire the software legally?
Who installed it?

NX 7.5.5.4 with Teamcenter 8 on win7 64
Intel Xeon @3.2GHz
8GB RAM
Nvidia Quadro 2000