Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ul50E gasket material / source

Status
Not open for further replies.
rmetzger

rmetzger

Mechanical
Dec 2, 2004
200
US
We are looking for a foam gasket material for a outdoor electrical enclose that is UL50E listed. Our preference is for a extruded round cord in neoprene or silicone of approx .100" diameter. Anyone have any good sources for UL50E material that is not cut from sheet? Custom extrusions would not be a problem to get the correct size if we can find a place that carries material with the necessary listing.

thanks
 
Status
Not open for further replies.

Similar threads

SAEEDGH
  • Locked
  • Question
very low temperature gasket maker (-100)
Replies
1
Views
51
satthepbienhoa
satthepbienhoa
Ramadan Ahmed
  • Locked
  • Question
Rubber Gasket Sealing Thickness and Clearance
Replies
0
Views
53
Ramadan Ahmed
Ramadan Ahmed
Sengalraja
  • Locked
  • Question
Gasket Sealing - Bolt spacing and bolt count
Replies
0
Views
56
Sengalraja
Sengalraja
Ramadan Ahmed
  • Locked
  • Question
IP68 Rubber Material
Replies
4
Views
70
satthepbienhoa
satthepbienhoa
Helepolis
  • Locked
  • Question
Jar Lid Gasket/Seal
Replies
2
Views
23
Helepolis
Helepolis

Part and Inventory Search

Sponsor

Back
Top