Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UMAT or VUMAT to model Orthotropic Material 1

Status
Not open for further replies.
HassanNazarinezhad

HassanNazarinezhad

Mechanical
Joined
Mar 11, 2014
Messages
5
Location
DE
Dear Colleagues,

I am looking for a UMAT or VUMAT to model Orthotropic Material behaviour. There is by default the Hill's criterion via Abaqus CAE for anisotropic material modeling, but I want to develop something further for my final model.
In this case, I am trying to find a V/UMAT for Hill criterion.

I would be thankful if you might share your experiences with me.
Best regards,

 
Status
Not open for further replies.

Similar threads

Vishakh_Rajendran
  • Question Question
Crack Initiation Criterion for orthotropic materials
Replies
2
Views
2K
Vishakh_Rajendran
Vishakh_Rajendran
P
  • Locked
  • Question Question
Abaqus two material model
Replies
2
Views
2K
payal.verma1989
P
H
  • Locked
  • Question Question
B31 VUMAT
Replies
2
Views
671
hswwh
H
T
  • Locked
  • Question Question
Query regarding 2D VUMAT
Replies
1
Views
2K
FEA way
FEA way
M
  • Locked
  • Question Question
3D HASHIN VUMAT
Replies
1
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top