update external links in CATIA part via a macro

[josephv]

Hello,

Good afternoon, was wondering if there was a way to update the external links in a CATIA part via the API.

The way to do this in CATIA is:

Edit > Links > Load > Synchronize

Or use the Right Mouse button on a "linked" body and select "Local Update".

There is an UpdateObject method, but it does not appear to update external links.

Please forward your comments and suggestions.


Thank you,

Joseph

 

[DBezaire]

In tools--options--infrastructure--part infrastructure there is an option to automatically update external references as well as an automatic update.

Regards,
Derek

 

[josephv]

Thanks Derek, good tip.

BTW we fixed this problem, by simply closing and then re-opening the part. Then the Update method works.

Best regards,

Joseph

 

[DBezaire]

Joseph - because your updates in your settings are set to manual, but another setting for update upon opening.

Regards,
Derek

 

[josephv]

Hi Derek,

Thanks, we did change the settings as per your suggestion.

The part does update in CATIA perfectly, but does not when we run the macro. I am guessing there is an issue with the Update Method. However, we do have a work around, so I am happy with the end result.

Thanks again,

Joseph