Urethane seat and aflas seal

[gguliye]

Hi
Does anyone have any ideas why we can't choose the urethane main valve seat with aflas seal for 453 pilot valve from Anderson greenwood ??
Regards

 

[The Obturator]

You can use those materials for the 453. Depends on the size, pressure and temperature. Is the sizing/selection program not allowing it?

Per ISO-4126, only the term Safety Valve is used regardless of application or design.

 

[gguliye]

No
the program says they can not be chosen together.
i dont know the reason why. Temperature/pressure limit allows it

regards,

 

[Latexman]

I'd call/email Emerson/Anderson Greenwood and ask. PLease let us know.

Good Luck,
Latexman

 

[The Obturator]

If not together, why not just select the superior one? I guess its just a BOM thing the program is giving you. As Latexman says, just ask the vendor. Let us know for reference.

Per ISO-4126, only the term Safety Valve is used regardless of application or design.

 

[gguliye]

Orbutrator
I have to give like to like one. I asked the factory and didn't receive any answer yet

 

[Latexman]

Patience, it's the holiday season. They'll revert.

Good Luck,
Latexman

 

[gguliye]

it is possible.
however, not in the standard option
regards,