Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

use of high gain feedback in cancellation of non linearity

Status
Not open for further replies.

saqib210

Electrical
Mar 15, 2015
4
i want to have an in depth knowledge of how increasing the feedback gain of a system decreases the no linearites present in the system.
 
Replies continue below

Recommended for you

Sounds like a good discussion to have with your instructor.
 
I have to research on this topic so plz share you knoledge.
 
Why not do the research then? You are telling us that you have to research the topic. Asking us is not research.

Tip: Have a look at Black feedback. That will get you started (1927), then research from then on.

Gunnar Englund
--------------------------------------
Half full - Half empty? I don't mind. It's what in it that counts.
 
If you have some knowledge then plz share.i am looking at many articles but not finding the exact thing.
 
I just shared the fundamental article. It explains what Black did. And why. Do not expect us to do your homework.

Gunnar Englund
--------------------------------------
Half full - Half empty? I don't mind. It's what in it that counts.
 
I want someone out there to be more friendly in discussion and sharing the concept
 
Here's an important lesson:
{
What you want is of no consequence in engineering.
}



Mike Halloran
Pembroke Pines, FL, USA
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor