Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

use of notes in ISO

Status
Not open for further replies.
ddkb

ddkb

Mechanical
Joined
Aug 12, 2004
Messages
6
Location
US
HI GUYS,
the drawings which i make have a lot of fillets which are most of the time the same radii.do you know if i can use a note instead of specifying it at each and every spot.
 
Status
Not open for further replies.

Similar threads

I
  • Locked
  • Question Question
interpretation of unilateral tolerance defined with ISO standard
Replies
0
Views
2K
imanoj23
I
spray_arc
  • Locked
  • Question Question
ISO 15614 Level 2 and ISO 9606
Replies
1
Views
1K
kingnero
kingnero
spray_arc
  • Locked
  • Question Question
ISO 3834 and EN 1090 Certifications for EURCODE 3
Replies
3
Views
1K
kingnero
kingnero
O.Rezzik
  • Locked
  • Question Question
Clarification for ISO 6892 Annex E - E.2.2 Longitudinal or transverse strip
Replies
0
Views
767
O.Rezzik
O.Rezzik
Ganeshrnair9
  • Locked
  • Question Question
ISO standard for welding procedure and welder qualification on Alu Zinc coated steel sheet
Replies
1
Views
1K
kingnero
kingnero

Part and Inventory Search

Sponsor

Back
Top