USER COMMAND EDIT ACTION DISABLED

[gani009]

Hi,
I tried to allocate journal file to my user command button but it's not letting me to do edit action

 

[JohnRBaker]

What version of NX are you running?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[gani009]

We are using NX8.5

 

[cowski]

What type of button did you add?
I suggest the "new user command" as outlined here:

http://nxjournaling.com/content/start-journal-custom-button

www.nxjournaling.com

 

[gani009]

Hi Cowski,
I used this link to create new user command then only I came to know this problem

 

[JohnRBaker]

It seems to work fine for me using NX 8.5.3.3.

What module were you in when you tried to add the new 'User Command'? Are you able to add the command, just not able to 'Edit' the action?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[gani009]

Now I got it, Once I come out customize window without allocating action to user command then edit action option got disabled. If I allocate action while adding user command to my menu then it's enabled.
Regards

 

[JohnRBaker]

I don't know, I have no problem going back and adding/editing the 'Action' for a 'user Command' that I've added in the past. I just did it for a 'User Command' that I added earlier this morning (while I was still at home) when I was testing NX 8.5 to see if could experience the behavior you described. This edit operation was in a totally new session of NX, after having shut-down my laptop, driven to the office and starting it up cold and launching NX 8.5.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[gani009]

Again I checked, this time I haven't faced any problem I can allocate edit action to user command. Anyhow my problem got solved. Thanks